High quality slocable 2PFG 1169 PV1-F 1*4MM2 solar cable

The electric cable is applied to transmit and distribute power in power transmission and distribution system of 35kV or lower. It is widely adopted in the fields including power, construction, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power  cable and in partial re-place of PVC insulated power cable.

Our solar cable PV1-F is designed and produced by the standard of 2Pfg1169/08.2007,the max voltage can meet with 1.8KV(Core-to core,non-grounded system),the max environment temperature of working is 120 degree and can be used in multiple circuit by more wires.we can supply free sample to our overseas customers and customers must bear express cost by themself.

The 0.6/1KV solar cable is a tinned copper conductor,XLPO insulation ,and LSZH sheath,which is  designed for connecting photovoltaic system components inside and outside of buildings and equipment with high mechanical requirements and extreme weather conditions.It has the characteristics of UV resistance,wears resistance,and aging resistance,and the service life is more than 25 year.

Our solar cable is pollution-free,noise-free,hight quality power energy,no limit fro the resource distribution area,no waste of fuel and short-trm construction.It is becoming the main role on the green energy-solar energy -the most popular and promoted engery all over the world.

Our single core solar cable with many advantages including excellent resisitance to U.V,oil,grease.oxygen and ozone,excellent  resistance to abrasion,halogen free ,flame retardant ,low toxicity,high voltage and current carring capacity.Our products was passed TUV,CE approved also..Eech meter of solar cable from our factory is of exquistie workmanship,so we can guarantee that our products are in good quality and stablility.

The special cable for photovoltaic solar power generation system adopts double layer insulation protetive sheath to protect the conductor .Our cable with long service,high temperature resistance,UV radiation resistance waterprrof and susnscreen.The thinkness of the double layer insulated wire sheath is uniform to ensure low core eccentricity and safe tranmission of photovoltaic power generation.

Our photovoltaic solar power cable with uniform thickness,antioxidant,oxidation ressitance and low smke halogen free material.It can transfering the electrical power smoothly and stably.It can be connected with solar connector male and female very well.The length can be customized.Our cable were test in different working conditions .All products were test by the strict testing standard of laboratory before leaving our factory.

Our photovoltaic solar power cable is rated 600V,1000V,2000V for meeting with AC and DC system.It is rated 90,105,125 or 150 ℃ dry and 90 ℃ wet.Single conductor,insulated and nonintegrally jeccketed,sunlight resistant ,photovoltaic wire rated for 90℃ wet or dry,600 V for interconnection wiring of grounded and ungrounded photovoltaic power system as described in section 630.31（And other applicable parts of the national electricl code,NFPA70).Rating s only apply to certain gage sizes.